The best AI 3D model generator, tested
Every AI 3D model on this site built the same five objects: a coffee dripper from a product photo, a mid-century armchair, a cartoon fox, a 35mm film camera and an articulated desk lamp. Each result is shown twice from the same camera, textured and as plain clay, because texture hides bad geometry. Then we ran three objects again with every model asked for about 50,000 triangles, so the comparison is not just a contest of default polygon counts, and a second attempt to see how much one run can be trusted. Nothing was cherry-picked. Trellis 2 builds only from a picture, so it appears on the photo test alone.
Anvisha Pai, Co-founder & CEO, Voyager
The short answer
- 1.Rodin Gen-2.5 is the best all-round pick from a text prompt: the only silver camera, a clean chair and a fox with its satchel strap, with PBR maps by default. $0.75 per base generation, 0.5 credit via Hyper3D direct credits.
- 2.Hunyuan3D 3 builds the cleanest geometry on the roster and the best results of all at a matched 50,000-triangle budget; turn on PBR, which is off by default. $0.38 per normal textured mesh, smallest prepaid pack via Tencent Cloud Hunyuan3D Professional API.
- 3.TRELLIS.2 is the best and cheapest way to turn a product photo into a model, with the crispest dripper of the set.
- 4.Meshy 7 is the one to use for game characters: the only fox with every part asked for, at a game-ready triangle count. $20.00 per monthly plan with 1,000 credits via Meshy Pro plan.
- 5.Tripo P2 is the low-poly pick, about 5,000 triangles with PBR maps by default, clean on simple shapes and weak on fine parts. $1.00 per no texture generation, text/image/multiview via Tripo API.
- 6.Tripo H3.1 is the cheapest text-to-3D model here and detailed, but its default meshes run to 1.4 million triangles; ask for a face limit. $0.10 per text, no texture via Tripo API.
Every model, measured
| Model | Vendor | Price | Seconds to build one model | 5 tests cost |
|---|---|---|---|---|
| Hunyuan3D 3 | Tencent | $0.38 per normal textured mesh, smallest prepaid pack via Tencent Cloud Hunyuan3D Professional API | 129 to 197 | $1.88 |
| Meshy 7.1 | Meshy | $20.00 per monthly plan with 1,000 credits via Meshy Pro plan | 181 to 424 | $6.00 |
| Meshy 6 | Meshy | $20.00 per monthly plan with 1,000 credits via Meshy Pro plan | 269 to 396 | $4.00 |
| Meshy 7 | Meshy | $20.00 per monthly plan with 1,000 credits via Meshy Pro plan | 134 to 241 | $6.00 |
| Rodin Gen-2.5 | Deemos | $0.75 per base generation, 0.5 credit via Hyper3D direct credits | 144 to 375 | $2.00 |
| TRELLIS.2 | Microsoft | 120 | $0.30 (1 test) | |
| Tripo H3.1 | Tripo (VAST) | $0.10 per text, no texture via Tripo API | 99 to 259 | $1.00 |
| Tripo P2 | Tripo (VAST) | $1.00 per no texture generation, text/image/multiview via Tripo API | 70 to 140 | $5.50 |
Seconds and cost are from our own runs of the same 5 tests through every model, one try each, at default settings.
How every result scored
An AI reviewer scored every result side by side on one contact sheet per object, textured and clay views together, with the triangle count and texture maps beside each, on a 1-to-5 scale per criterion. We checked its scores against the renders and kept them where we agreed. Usability assumes the likely use of each object: a real-time game for the fox and the lamp, product rendering for the dripper, chair and camera. Treat a difference under half a point as a tie: each score is one attempt.
- Prompt: Every named part present, with the right shape, colours and materials.
- Geometry: From the clay view: clean, solid shape, thin parts intact, nothing melted or floating.
- Texture: Crisp colour and material detail, no smearing, seams or baked-in lighting.
- Ready to use: Triangle count and maps suited to the object's likely use without heavy cleanup.
| Model | Prompt | Geometry | Texture | Ready to use | Overall | At 50K budget | Second attempt |
|---|---|---|---|---|---|---|---|
| TRELLIS.2 1 object | 4.0 | 5.0 | 4.0 | 4.0 | 4.3 | 4.3 | 4.3 |
| Hunyuan3D 3 5 objects | 4.0 | 4.6 | 3.4 | 2.6 | 3.6 | 4.3 | 3.8 |
| Rodin Gen-2.5 5 objects | 3.8 | 4.0 | 3.6 | 3.2 | 3.6 | 4.0 | 3.7 |
| Meshy 7 5 objects | 3.8 | 3.8 | 3.4 | 3.4 | 3.6 | 4.1 | 3.8 |
| Tripo P2 5 objects | 3.4 | 3.4 | 3.2 | 3.4 | 3.4 | 3.8 | 3.9 |
| Meshy 7.1 5 objects | 3.2 | 3.0 | 3.4 | 3.2 | 3.2 | 3.8 | 3.4 |
| Tripo H3.1 5 objects | 3.6 | 3.6 | 3.4 | 2.0 | 3.1 | 3.5 | 3.3 |
| Meshy 6 5 objects | 2.8 | 3.2 | 3.0 | 3.4 | 3.1 | 3.2 | 3.2 |
Means of 1-to-5 scores. Overall averages the criteria over the default runs; the last two columns average the same criteria over the matched-budget runs and the second default attempts of the original three objects.
Product from a photo
This prompt in full →Every model got the cone, the ribs and the flat base right, so this test comes down to finish. Trellis 2 and Hunyuan3D 3 made the cleanest, most symmetric cones; Trellis has the more believable matte black, while Hunyuan's black is crushed flat and has no PBR maps at default settings. Tripo P2 is clean at under 5,000 triangles. Tripo H3.1 and Meshy 6 both left the rim lumpy and uneven, and Meshy 6 came out grey rather than black. At a 50,000-triangle budget Hunyuan3D 3 with PBR on was the best of all.


461K triangles · 2 textures at 2048, PBR · 15.1 MB GLBDownload GLB


500K triangles · 1 texture at 4096 · 20.4 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 1.5 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 2.4 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 23.4 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 3.9 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 2.5 MB GLBDownload GLB


1.5M triangles · 3 textures at 2048, PBR · 43.7 MB GLBDownload GLB
At a matched 50,000-triangle budget
Default triangle counts range from about 5,000 to 1.5 million, which makes a default-settings comparison partly a comparison of file sizes. Here every model was asked for about 50,000 triangles, with PBR maps where the model offers them. Trellis 2's setting counts vertices rather than triangles, and it returned about 24,000 triangles.


49K triangles · 3 textures at 4096, PBR · 13.5 MB GLBDownload GLB


52K triangles · 3 textures at 2048, PBR · 5.2 MB GLBDownload GLB


51K triangles · 4 textures at 2048, PBR · 10.6 MB GLBDownload GLB


52K triangles · 3 textures at 2048, PBR · 5.4 MB GLBDownload GLB


50K triangles · 3 textures at 2048, PBR · 8.2 MB GLBDownload GLB


24K triangles · 2 textures at 2048, PBR · 1.3 MB GLBDownload GLB


48K triangles · 3 textures at 2048, PBR · 3.2 MB GLBDownload GLB


50K triangles · 3 textures at 2048, PBR · 2.8 MB GLBDownload GLB
A second attempt
The same request sent again, to show how much a single run varies. Most second attempts landed within a point of the first, and the dripper and chair leaders held. Meshy 7.1 varied most: its second chair had the walnut frame its first lacked, and its second dripper was worse. On the fox, Meshy 7's second attempt had a teal scarf and Tripo P2's added the satchel, so the two finished close.


500K triangles · 1 texture at 4096 · 20.0 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 2.2 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 4.2 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 2.3 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 23.1 MB GLBDownload GLB


470K triangles · 2 textures at 2048, PBR · 15.5 MB GLBDownload GLB


1.4M triangles · 3 textures at 2048, PBR · 41.9 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 1.5 MB GLBDownload GLB
Furniture
This prompt in full →Most models built a convincing mid-century chair, so the misses stand out. Hunyuan3D 3 has the cleanest frame, with stretchers, symmetric arms and true mustard fabric; Rodin 2.5 is a close second with visible wood grain. Meshy 7 and both Tripo models are good, though Tripo's fabric is blotchy. Meshy 7.1's first chair was an upholstered club chair that hides the walnut frame, and Meshy 6's had one armrest and a bare post on the other side; both second attempts built the open walnut frame.


500K triangles · 1 texture at 4096 · 30.1 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 26.8 MB GLBDownload GLB


28K triangles · 1 texture at 2048 · 4.8 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 2.6 MB GLBDownload GLB


1.4M triangles · 3 textures at 2048, PBR · 42.9 MB GLBDownload GLB


27K triangles · 1 texture at 2048 · 4.7 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 4.8 MB GLBDownload GLB
At a matched 50,000-triangle budget
Default triangle counts range from about 5,000 to 1.5 million, which makes a default-settings comparison partly a comparison of file sizes. Here every model was asked for about 50,000 triangles, with PBR maps where the model offers them. Trellis 2's setting counts vertices rather than triangles, and it returned about 24,000 triangles.


50K triangles · 3 textures at 4096, PBR · 26.1 MB GLBDownload GLB


49K triangles · 3 textures at 2048, PBR · 11.5 MB GLBDownload GLB


49K triangles · 4 textures at 2048, PBR · 11.0 MB GLBDownload GLB


47K triangles · 3 textures at 2048, PBR · 11.2 MB GLBDownload GLB


50K triangles · 3 textures at 2048, PBR · 9.7 MB GLBDownload GLB


46K triangles · 3 textures at 2048, PBR · 4.0 MB GLBDownload GLB


53K triangles · 3 textures at 2048, PBR · 4.6 MB GLBDownload GLB
A second attempt
The same request sent again, to show how much a single run varies. Most second attempts landed within a point of the first, and the dripper and chair leaders held. Meshy 7.1 varied most: its second chair had the walnut frame its first lacked, and its second dripper was worse. On the fox, Meshy 7's second attempt had a teal scarf and Tripo P2's added the satchel, so the two finished close.


500K triangles · 1 texture at 4096 · 30.0 MB GLBDownload GLB


28K triangles · 1 texture at 2048 · 5.0 MB GLBDownload GLB


28K triangles · 1 texture at 2048 · 4.7 MB GLBDownload GLB


28K triangles · 1 texture at 2048 · 5.4 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 25.2 MB GLBDownload GLB


1.4M triangles · 3 textures at 2048, PBR · 45.0 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 3.0 MB GLBDownload GLB
Stylised character
This prompt in full →Every fox has its scarf; the satchel is the test. Meshy 7 drew the scarf and a brown satchel on a strap, with clean limbs at about 31,000 triangles, the one result ready for a game as it stands. Rodin 2.5, Hunyuan3D 3, Tripo H3.1 and Meshy 7.1 also have a bag, but Rodin and Hunyuan arrive at 500,000 triangles, Tripo H3.1 at 1.5 million, and Meshy 7.1's scarf reads teal with spiky fur on the tail. Meshy 6 and Tripo P2 left the satchel out; Tripo P2's second attempt included it. At a 50,000-triangle budget Meshy 7, Meshy 7.1 and Rodin 2.5 tied at the top.


31K triangles · 1 texture at 2048 · 6.2 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 26.8 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 6.2 MB GLBDownload GLB


500K triangles · 1 texture at 4096 · 31.7 MB GLBDownload GLB


1.5M triangles · 3 textures at 2048, PBR · 43.9 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 4.9 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 2.3 MB GLBDownload GLB
At a matched 50,000-triangle budget
Default triangle counts range from about 5,000 to 1.5 million, which makes a default-settings comparison partly a comparison of file sizes. Here every model was asked for about 50,000 triangles, with PBR maps where the model offers them. Trellis 2's setting counts vertices rather than triangles, and it returned about 24,000 triangles.


33K triangles · 3 textures at 4096, PBR · 35.1 MB GLBDownload GLB


52K triangles · 3 textures at 2048, PBR · 11.9 MB GLBDownload GLB


52K triangles · 4 textures at 2048, PBR · 10.5 MB GLBDownload GLB


52K triangles · 3 textures at 2048, PBR · 9.9 MB GLBDownload GLB


50K triangles · 3 textures at 2048, PBR · 11.9 MB GLBDownload GLB


49K triangles · 3 textures at 2048, PBR · 4.4 MB GLBDownload GLB


55K triangles · 3 textures at 2048, PBR · 4.7 MB GLBDownload GLB
A second attempt
The same request sent again, to show how much a single run varies. Most second attempts landed within a point of the first, and the dripper and chair leaders held. Meshy 7.1 varied most: its second chair had the walnut frame its first lacked, and its second dripper was worse. On the fox, Meshy 7's second attempt had a teal scarf and Tripo P2's added the satchel, so the two finished close.


496K triangles · 1 texture at 4096 · 32.7 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 5.9 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 5.8 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 4.9 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 27.3 MB GLBDownload GLB


1.5M triangles · 3 textures at 2048, PBR · 45.4 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 2.1 MB GLBDownload GLB
Hard-surface object
This prompt in full →Rodin 2.5 is the only model that built a brushed silver body, and it has the leather grip, an engraved lens and the wrist strap too. Hunyuan3D 3 has the crispest hard edges and a separate strap, but its silver reads as white, as do all three Meshy cameras. Tripo H3.1 made a sharp, detailed camera in black instead of silver. Tripo P2's camera is blobby, with the strap fused into a stub and bright spots baked into the texture: a hard-surface object with fine parts is where a 4,000-triangle mesh runs out.


500K triangles · 3 textures at 2048, PBR · 30.4 MB GLBDownload GLB


500K triangles · 1 texture at 4096 · 33.1 MB GLBDownload GLB


29K triangles · 1 texture at 2048 · 4.8 MB GLBDownload GLB


1.4M triangles · 3 textures at 2048, PBR · 44.1 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 4.9 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 5.0 MB GLBDownload GLB


4K triangles · 3 textures at 2048, PBR · 3.2 MB GLBDownload GLB
Thin multi-part object
This prompt in full →The hardest test on the page: no lamp scored 5 on anything but file size. Tripo H3.1 and Hunyuan3D 3 built two articulated arms with springs; Tripo's are black with a glossy shade and a 1.4-million-triangle file, Hunyuan's are matte green with a dome shade and blotchy springs. Tripo P2 has the double arms but jagged joints. Meshy 6, Meshy 7 and Rodin 2.5 each made a clean lamp with a single arm and no springs. Meshy 7.1's second arm sticks out as a disconnected stub.


500K triangles · 1 texture at 4096 · 30.7 MB GLBDownload GLB


1.4M triangles · 3 textures at 2048, PBR · 42.8 MB GLBDownload GLB


5K triangles · 3 textures at 2048, PBR · 2.1 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 4.0 MB GLBDownload GLB


500K triangles · 3 textures at 2048, PBR · 22.7 MB GLBDownload GLB


31K triangles · 1 texture at 2048 · 3.5 MB GLBDownload GLB


30K triangles · 1 texture at 2048 · 4.8 MB GLBDownload GLB
Head to head
Frequently asked questions
What is the best AI 3D model generator in 2026?
On the same five objects, Rodin 2.5 and Hunyuan3D 3 scored highest from text prompts: Rodin for prompt accuracy and PBR maps by default, Hunyuan for the cleanest geometry. Trellis 2 was best from a product photo, and Meshy 7 made the most game-ready character.
Which AI 3D generator is best for game assets?
Meshy 7 for characters: its fox had every part asked for at about 31,000 triangles. Tripo P2 makes meshes around 5,000 triangles with PBR maps by default, clean on simple shapes but weak on fine parts. Rodin, Hunyuan3D and Tripo H3.1 default to 500,000 to 1.5 million triangles, so set a face limit for games.
Is Meshy better than Tripo?
Meshy 7 beat both Tripo models on our fox and tied Tripo H3.1 on the camera, while Tripo H3.1 built the desk lamp's two sprung arms, which no Meshy model did. Tripo H3.1 is the cheaper at default settings, but its files are about 50 times larger; at a matched 50,000 triangles Meshy 7 scored higher.
Which AI 3D model generator is free?
Trellis 2 is free to run on your own GPU under the MIT licence, with at least 24 GB of graphics memory. Tencent advertises 20 free Hunyuan3D web generations a day. Meshy, Tripo and Rodin offer limited free credits in their web apps, with download and licence limits; each model page lists the current free tier and its source.
Can AI make a 3D model from a photo?
Yes. Every model on this page can build from an image, and Trellis 2 builds only from images. On our product photo, Trellis 2 and Hunyuan3D 3 made the cleanest, most faithful dripper.
Voyager
Run supported models inside Voyager
Voyager is an agent for creative work that runs supported models. Brief it, and it picks the model for the job, makes the thing and hands back something you can edit. Create an account to get started.

